Bathrooms are a particularly vulnerable area dirty, wet and humid. For keeping a healthy clean all equipment in it must be cleaned periodically, at least once a week. Do not forget, take care and clean also the bathroom door. Indeed, elements of the building is cleaned often escape.
Cleanliness is essential to health, clean door will support health. Doors will also be maintained long life. Of the treatment process will be different for different door materials.

In selecting the material, there are a lot of material you can use the bathroom doors are generally made of wood materials, Aluminum, and Vinyl. As we know that the door is frequently exposed to water, causing moisture to be weathered and then destroyed. Damage usually starts from the bottom because this part of the most frequent and prolonged exposure to water. if the door had rotted and broken, the easiest way is to replace the door frames with a new following. therefore less suitable for wooden doors small bathrooms. If you want to use a wooden door, install a door in an area away from water splashes. You may also coats it with a waterproof material, such as acrylic, fiber, or aluminum, on the inside facing the bathroom.

If you use aluminum doors, there are some important things to note. Aluminum is the material that is waterproof and corrosion. As the bathroom door, he shaped assemblies that are attached to frames. properties of aluminum that is waterproof and anti-corrosion allow this material to use as the bathroom door. but aluminum is not the best choice.

Aluminum doors are prone to scratches. Addition, during the process of open and closed, over time will cause a loud creak. Precision was easy to change the door hinges or caused by loose or sagging Rivet.

Doors vinyl: Vinyl or PVC-like plastic. Material is waterproof, anti corrosion, not noisy, and have artistic value better than aluminum. The surface can be coated with another material.
The price of vinyl doors are relatively low. Not goes a finishing, and the treatment was easy. The door was fused between the door frames. As the bathroom door, vinyl doors can as an alternative to water and corrosion resistant.

To treat / clean the doors of vinyl and aluminum is quite easy. Doors of wood, for example, simply cleaned of dust and water with a rag. Doors vinyl and aluminum can be washed using soap, detergent, plus a special cream for aluminum.
Following steps to clean vinyl and aluminum doors,

Vinyl door:

Prepare 1 liter of water. Mix with enough liquid detergent or soap. Dissolve until frothy.
Dampen a sponge with soapy water, rubbing the entire surface of the sponge to the door with enough pressure. Ensure that no part of the surface and sides of the door is missing.
Dip a sponge absorbing water, then smeared the water to the surface of the door panel until all the soap and clean dirt.
Wipe the surface down to the edge of the door panel and the sides, until dry.

Aluminum doors:

Boil 1 liter of water. Add ambience tablespoons cream of tartar and stir.
Sprinkle and this solution to the entire surface of the door with a brush. Let stand for 15 minutes.
Perform steps 1 through 4 in the process of cleaning vinyl door.